As we continue our journey in Six Sigma it seems pertinent to discuss the different types of distributions you will see in your analysis. Let’s start with one at a time. The most common distribution is the Normal Distribution and here’s what you should know about it.
First, what is a distribution?
Simply put, a distribution will tell you how often a variable occurs in your process. This is important because the commonness of your variables will inevitable create a foundation for your improvement project.
Types of Distribution
The Normal Distribution
A normal distribution (Gaussian Curve, the average person knows it as the Bell Curve) shows a equal distribution. The mean (the average) divides the data in half, 50% on the data on each side of the mean. The Normal Distribution will have the following hallmarks:
This distribution is considered to be the most important distribution.
The area under the curve should equal 1.
Physical aspects of the curve should resemble a hill and should be symmetrical.
Both directions on either side of the mean extend indefinitely and never touch the horizontal axis.
White noise in your process should produce a normal curve shape
The Z distribution has a mean of 0 and a standard deviation of 1.
The mean (average), median (mid-point) and the mode (most common value) should be the same data value.
Next week, it’s on to non-normal classifications. Get to analyzing and if you need any help, reach out and let us know!
In metrics the most honest finding will be that your metrics will have degrees of variation. Understanding where and how those metrics occur, is the key to using your data in a forward thinking strategy. Let’s start with something simple, like toy production. We are going to track some standard variation sources.
Within Unit Encoding
This variation source occurs when you are measuring output from a single production cycle. Some places that variation is likely to occur are the width of parts, color shading, length of toy etc. Now you can choose to analyze different production cycles on the same day or alternating days, but you will always be comparing samples from the same cycle. A new production sample means a new data point.
Between Unit Encoding
These names are dead giveaways, but I digress! This implies that you are looking at samples from two different production cycles. This is different in that you would want to identify two different samples from different production cycles. The variations you are looking for will give you some clue as to whether the variations are operation influenced or process influenced.
This is the trickiest variation source. This specifically calls for you to compare your variation averages from all of your data points in a single day. So you can theoretically have both within unit variation data and between unit variations data, depending on how specific you need to get.
The key to getting the most out of your data is to understand what it’s telling you. Understanding where the variations are coming from is the first step to getting the most out of your data.
In our conversations about process capability, I want to focus your attention on baseline performance. Baseline Performance is an alternative way to view long-term and short-term data. When you hear baseline performance it most likely will be a description of baseline performance and it most likely will be used to describe long-term data.
What it means
Baseline in a nutshell gives you the average long-term performance of a specific process without
controlling any variables. The easiest way to think of this is a visualization of FTY (First Time Yield). Remember FTY shows you the challenges in your process when they are normally run without any interference from you.
What to use it on
When measuring baseline, you are identifying a typical challenge within a process. For example if you are observing the process for returns, your long-term data will include morning, afternoon and evening shift; multiple employees and submission points (email, in-person and via telephone).
Your short term data will appear on the visualization as well, so you will be able to see in a visual representation short-term and long-term average behavior for your processes. If there is always a dip in quality at around lunchtime, you will be able to see that visually represented in your data.
Why use it?
Baseline performance is going to quickly tell you where your burning platform issues are. If you are heading into a meeting with management, this is a report to take with you. It shows the long-term vs. short-term and gives you solid business evidence to support improvement projects.
Next week, we will tackle measures of capability and what they tell you. Remember that this is can be the starting point to discuss improvement with your belt. If you need to get started, give us a call and we can get you started.
Okay for the last two weeks, I’ve been talking about Measurement System Analysis and before I move on to a new topic I have one final post on why you should be thinking about MSA. Here it goes…
Why you use it
- You use MSA to compare you customer’s expectations to your inspection standards. This is a very quick illustration of a value stream map and a good way to ensure that you are providing the best service for your customer.
- It gives you a snapshot of where the training in your organization should be.
- It gives you the opportunity to evaluate your trainers in a truly neutral fashion. The data doesn’t lie and you can assess the training in your organization from a truly objective perspective.
- Creates an opportunity to analyze your existing systems and evaluate new systems.
Why is it important?
- Allows you to measure the amount of variation in your measurement systems.
- Allows you to compare user variation.
- Allows you to compare two or more measurement systems.
- Helps you develop a baseline for measurement systems.
- Helps you develop a system to evaluate the moving pieces in your organization.
- Gives you a true before and after picture.
- Gives you a true measurement of variation and the causes of it.
- Evaluates your training programs.
So I am a big fan of MSA as you can tell, but the bottom line is that it can really affect your organization in the best way. It forces you to be accountable and it forces you to pay attention to the changes. Give it shot and if we can help, let us know.
This blog is about Six Sigma data analysis. Because statistics are such a big part of the Six Sigma world, it makes sense that we talk about the data that is gathered and what it means. So here we go….
There are different types of data and anytime you measure something you going to need how to interpret it. There are two main types of data: attributive and variable.
Some people call this the most basic form of data, but for business purposes I don’t accept that. Qualitative data is simple in the fact that it is generally data that can be gathered by asking a yes or no question. For example, ‘Did they buy the new product?’ What is limiting about attributive data is that you really can’t analyze the results in a meaningful way, but it can give you a pretty good place to set your focus.
Variable data is also called quantitative and this is the data that you can measure and analyze. In order to decide if data you have is variable ask yourself these questions:
- Can you classify the data and count the results? (Think number of defects for a particular product line)? If you can this is called discrete data and the limitation of discrete data is that it cannot be broken down into smaller measurements to create additional meaning. It’s a one hit wonder.
- Can the data be measured on a time line with meaningful divisions (Think time, production speed, delivery dates etc…) If you can this is called continuous data and it can be divided further to create additional data.
As with all of these blogs, this is to get you started and statistical data clearly has more to it than one paragraph. But information is the first step and one you know what type of data you have, you have a better idea of what you need to know. Give us call and we can help you create where you need to go next.